Digital welding Gauge
Use to
Measure fillet weld.
Measure weld throat thickness.
Precision design, for measuring of flat welding seams and welding seams in corners.In order to observe the required V-seam-angle at flat welds, the angles of 60°, 70°, 80°and 90° are attached at the gauge.
Abilities:
Holds either the zero setting or measured value at any position for diffrential measurements.
Has a serial output to interface with a computer or printer to process data.
Automatically turns on by moving the main sacle or by pressing ON/OFF key.
Automatically turns off after 4 minutes of inactivity…conserving battery power.
Features:
Measures Butt Weld Reinforcement
Measures Throat
Stainless steel,Hardened and ground
Turn on/off,Switchable mm/inch
Measured value showed on a big LCD-Display
Reading +/- 0,01 mm
Power supply: Battery 1.5 V, LR44 SW
With data output interface
Function:
1. Zero setting at any position
2. Metric/ Inch system conversion at any
position
3. The digital weld gauge is equipped with
an output port
Data can be input into a computer or a
special printer via special connecting cable.
The working way
of the interface
Synchronous serialization
Data: Binary code, 24 bits Each datum
will be transferred twice. The cycle is
300ms(20ms in fact reading mode)
Transmitting time: 0.5ms
Operation:
Press the On/off button to switch on the power. Press the mm/in button to set the unit
system you need. Set zero on a plane to measure plane weld seam according to the
picture on the right, set zero on a 90° bevel to measure 90° bevel weld seam. Then press Zero button, the LCD will display “mm0.00”. Put the weld seam between two measuring faces and move the scale till
measuring faces and weld seam contact gently, then the value displayed is the height of weld seam.
Product Tags:
|
|
Stainless Steel Easy to Read Digital Welding Inspection Gauges with Data Output Interface Images
|
